5 Causes of Ball Joints on Cars Quickly Damage

5 Causes of Ball Joints on Cars Quickly Damage – Ball joint is the most important part of the suspension system that serves to support and become the fulcrum of other suspension components such as suspension arms or links. Ball joints also often receive shocks and vibrations that occur in the wheels directly.

Read more: 5 Solutions for Difficult Car Steering Turns

5 Causes of Ball Joints on Cars Quickly Damage


The heavy workload borne by the ball joints in this suspension system also seems to make the ball joints must always be checked and maintained regularly. Lack of attention and care on the ball joint can result in a gurgling sound in the car’s suspension.

Causes of Ball Joints on Cars Quickly Damage
New vs Old Ball Joints – Causes of Ball Joints on Cars Quickly Damage.

In addition, ball joint damage can also cause fatal losses for the owner or driver of the car. So, what can be the cause of a damaged car ball joint?

Well, in this article, I will share information regarding the causes of damaged car ball joints. Check out the reviews about the causes of damaged car ball joints below.

1. Often Passed by Damaged Roads and Puddles

Frequently passing through damaged roads and flooding can also be the cause of damaged car ball joints. Yes, passing through a flooded road can make the grease in the ball joint disappear. Ball joints that lose lubricant will increase friction within the ball joint itself so that sooner or later it can damage the condition of the ball joint.

In addition, often passing through damaged road conditions is also the cause of the ball joint being damaged quickly. When a car tire hits a hole, the shock from the wheels will flow directly through the ball joint. The more frequent and harder the blows that occur when passing through damaged roads, the faster the ball joints will be damaged, not least for high quality and original ball joints.

Read more: 6 Main Causes of Difficult Steering Wheel Turning

2. Improper Steering Angle Adjustment

Wrong steering angle adjustment can be the cause of damaged car ball joints. The steering angle is the angle that is set to get the most optimal steering performance with the least risk of damage.

Causes of Ball Joints on Cars Quickly Damage
Image source: s2ki

The general term we are familiar with for this wheel steering angle adjustment is “spooring”. There are at least 4 steering angles that must be regularly reset, namely camber, caster, toe in and toe out, and kingping.

This steering angle adjustment error will obviously accelerate ball joint damage, such as adjusting the wheel camber angle that is too minus, where the top side of the wheel leads too deep into the car body.

This condition will make the ball joint get too big a load with less space to move. As a result, ball joint damage occurs more quickly.

3. Damaged Suspension Rubber Components Are Not Replaced Immediately

Another cause of ball joint damage is due to damage to the suspension rubber components (bushings) that are not replaced immediately. For example, damage to the lower arm rubber bushings, upper arm rubber bushings, and others.

This rubber bushing serves to dampen vibrations from the wheels and suspension so that the car feels more comfortable to use. In addition to dampening vibrations, this rubber bushing also functions to maintain the steering angle of the wheels.

Leaving the rubber bushings on the suspension damaged can automatically make the steering angles also change which in turn will make the ball joints of the car damaged more quickly.

Read more: Whats the Tesla Model S Smart Air Suspension Like?

4. Ball Joint Protector Rubber is Damaged, Torn, or Missing

Causes of Ball Joints on Cars Quickly Damage
Bad Ball Joint’s Rubber.

The next cause of damaged ball joints is the result of the ball joint’s protective rubber being damaged, torn or missing. This ball joint protective rubber serves to prevent water, dust, sand, and other impurities from entering the ball joint.

If the protective rubber for the ball joint is damaged, torn or missing, all kinds of dirt will easily enter the ball joint. The effect will make the ball joint wear and tear. Even in what conditions the ball joint will rust and break easily.

5. Grease Ball Joint Never Replace

On some ball joint models (especially those with nipples), it requires the vehicle owner to replace the ball joint grease regularly. Yes, this ball joint model must be replaced regularly, at least every 10,000 km.

Failure to change the grease on the ball joint will cause the ball joint to become less lubricated, harden, and become worn and oblique. Therefore, always pay attention to the schedule for replacing the ball joint grease to prevent the ball joint from being damaged quickly.

Leave a Reply

Your email address will not be published. Required fields are marked *