6 Main Causes of Difficult Steering Wheel Turning

6 Main Causes of Difficult Steering Wheel Turning – The steering system is an important part of the control mechanism of a car. Unfortunately, this system rarely gets attention and instead pays more attention to car engines of course. This provides control over the direction in which the driver wants to guide the car.

6 Main Causes of Difficult Steering Wheel Turning

Car steering problems occur quite a lot. For example, the scroll wheel turns when it is running slowly. Steering that is difficult to turn is dangerous because it can result in an accident when you are driving on a highway or road full of cars or other vehicles or even people. Just imagine a situation when you need to change lanes or turn but the steering wheel is stuck or at least moving slowly. It can be a deadly situation if you are driving on dangerous mountain roads.

Irregular maintenance and late servicing coupled with a few worn components are the reasons the steering wheel becomes difficult for us to turn. It’s important to know because it will help you recognize the signs early and get the car to service before they get any worse.

6 Main Causes of Difficult Steering Wheel Turning

First – Tire Pressure

Bad air pressure can be a cause of difficulty turning the steering wheel. Improper tire pressure, especially a flat tire, can trigger this problem. All of your car tires should be inflated to the PSI recommended by the manufacturer. If necessary, we use nitrogen gas to make wheel pressure better and the steering wheel lighter.

Less tire pressure makes the tire surface friction against the highway to be greater. As a driver, you have to give the steering wheel a greater rotational force than usual to counteract the friction. This then gives rise to the feeling that the steering wheel has become heavier than usual.

Also, front-end alignment is another important point. Uneven wear on the front tires will cause your car to pull sideways when driving or turning. The uneven tread causes the wheels to misalign, which can also cause the steering wheel to become hard and stiff when turning on the road.

Second – Bad Steering Rack

The cause of the steering wheel is bad for us to turn is bad steering rack. This rarely happens with new cars, but for cars over 5 years, bad steering rack is starting to happen a lot.

The steering rack is connected to the wheels via a series of U-shafts and joints. These parts and racks themselves can be damaged and worn just from everyday driving. If you find your wheels stiff right after starting your car, the problem is definitely with the steering rack. The wheels will gradually feel free to move as you continue driving. This happens because the racks get hotter as the engine runs, allowing the lubricant to settle. You can still drive in this condition but leaving a damaged rack in like that will compound the problem.

Third – Broken Serpentine Belt

Another common cause of a hard-turning steering wheel is a cracked or broken serpentine belt. Belts wear out over time as they function all the time while you are driving the car. The wheels begin to show signs of stiffness as the belt begins to erode and loosen. Delaying repair or replacement will cause the belt to break, causing the steering wheel to break.

Fourth – Fluid Leakage

The inadequate fluid level in the steering system is another major reason. This happens if the pressure hose area leaks or loosens. Fluid leaks through that gap, which causes a pressure drop in the system and dries up the pump. As a result, the wheels do not get a sufficient fluid supply to run freely.

Fifth – Power Steering Pump Malfunction

Apart from fluid, the pump also has a major role in creating the right amount of pressure in the power steering system. If the pump breaks or stops working for some reason, it will be difficult to turn the steering wheel. A damaged pump will not completely stop the wheel. You can still move it but it takes a little more effort, which can be dangerous when you have to make sharp turns on the road.

Sixth – The Power Steering Fluid Is Thick

Like all other types of fluids in a vehicle, power steering fluid also collects dirt and debris over time. Dirt and metal debris due to the friction of the power steering components make the power steering fluid thicker. If the power steering fluid is too thick to flow freely and lubricate all parts of the system if you don’t change it within the allotted time. This mainly makes it difficult for the steering wheel to turn at low speed.

If this occurs, the only solution is to flush the old liquid out of the system and fill it with fresh new liquid. If you are a hobbyist, this is a simple job. However, if not, the cost of replacing the power steering fluid is also not a drain on your wallet.

1 thought on “6 Main Causes of Difficult Steering Wheel Turning

  1. Pingback: What is a Cruise Control System and How Do You Use It? | Hi-tech for Future

Leave a Reply

Your email address will not be published.