Reasons for Chassis Control System Error on Nissan Rogue or X-Trail V-Series

Mech4cars.com – Reasons for Chassis Control System Error on Nissan Rogue or X-Trail V-Series – Nissan Rogue owners, especially on some recent models, will likely see a “Chassis Control” notification flash on the information screen. Of course, the unusual message can make you worry. Then, what exactly is chassis control? And why does the chassis control system error on your car dashboard light up? In this article, I will try to discuss more this problem. Come on, keep reading.

What Does Chassis Control Mean?

Technological advances continue to develop our demands as well as good news for the world community in general. One of the technological developments that deserve appreciation is that of the Nissan Rogue or X-Trail V-Series. What’s that? Yes, the technology is the chassis control system. The chassis control system is the result of Nissan‘s independent research. This technology aims to help drivers enjoy a smooth driving experience while providing maximum safety for passengers. So what is a chassis control system? Chassis control is an important part of your vehicle as it collects data about wheel speed, acceleration, G-forces, etc… which does not allow too much stress on your car, even in rough road areas.

https://mech4cars.com/wp-admin/options-general.php?page=ad-inserter.php#tab-7

Read More: Toyota CVT Transmission Same as Honda and Nissan CVT

Reasons for Chassis Control System Error

Thanks to advanced technology, the chassis control system have undergone many developments. In the modern automotive industry, the process of developing chassis control systems is still technologically ongoing to make driving and turning seamless. In general, the active chassis control system includes 3 different technologies as follows.

Active ride control

The first is active rider control. This system will automatically brake and adjust traction depending on road or terrain conditions to help the car drive smoothly and smoothly over uneven roads. The brake system creates a small amount of impact force which does not slow down the vehicle but only allows the shock absorbers to absorb the impact force more quickly, eliminating vibrations to the occupants. At the same time, the sensor detects a change in wheel speed to change the engine torque. In addition, also helps the vehicle maintain a stable speed.

Active engine brake

This is a safety feature that assists the driver when cornering or braking. This system will monitor the vehicle speed along with the parameters of the steering and braking systems. Thus it will decide whether to increase/reduce the level of engine braking. With this extra support, the driver will put less pressure on the brake pedal which helps a smoother and safer ride.

Active Trace Control

This system makes the driver more confidence when cornering. The trick is to control the braking force on each wheel according to each driving condition, based on steering level, speed, and braking force acting on emergency turns, or when entering/separating lanes on the highway. Many Nissan Rogue-owned drivers say they are usually very confident when driving the Rogue at high speeds, over 80 km/h; every time cornering at high speed, the car turns very smoothly.

Read more: What is a Cruise Control System and How Do You Use It?

Reasons for Chassis Control System Error

Combining these three technologies together, the chassis control system gives the driver confidence. In addition, the passengers in the car are always comfortable and not tired during the trip. It’s possible that through these words, it’s hard to fully imagine the value of this system.

Reasons for Chassis Control System Error

Like any electronic system or any part of your vehicle, the chassis control systems can occasionally fail. So what’s the reason? We will discuss in detail the causes behind the chassis control system error with possible solutions for how to fix the chassis control system error as follows.

1. Loose battery connection

Loose terminals will affect the current. When there is little power entering the electrical system, it will cause the car’s electrical components and sensors including the chassis control system to not function properly or be damaged. At that time, you will see a warning light on your dashboard. If a loose battery connection is a cause, you will need to tighten the battery cables to resolve this error. It shouldn’t be too difficult for you to screw the positive or negative cable from your battery connection. You can solve the problem with just a wrench or a screwdriver. Usually, there will be a nut attached to the battery terminal. And therefore, you only need to turn this nut to tighten the connection.

2. Dirty and dead battery

Over time, corrosion or dirt can build up in your car battery or it can die. And you will notice that your vehicle will have problems starting or problems with the electrical parts, especially your chassis control system. As a result, this system will lose its function and display a warning notification on the dashboard. To clean a car battery, you can apply a cleaning solution (baking soda) combined with rinsing to remove corrosion. Note: Don’t forget to disconnect and reconnect cables before and after cleaning your car battery.

Reasons for Chassis Control System Error

For dead battery situations, there are several ways to revive your battery;

  • A second battery, battery booster, or jumper cables can help you start your vehicle. Do not turn off the car engine because your battery will not receive a charge at that time.
  • Using distilled water: When the electrolyte level is low, the addition of distilled water may be sufficient to completely flood the plate and allow a slightly larger reaction area. This may be enough to give the bike a few extra spins. Instead of using distilled water, you can use Epsom salts or Aspirin to power up the battery.

When your car’s battery is dead, you won’t be able to start the engine let alone the chassis control system working properly. Usually, we can still revive a dead car battery – at least temporarily – to keep you going. However, in some situations, your battery won’t come back on, and replacing it is something you can’t avoid.

3. ABS sensor failure

Technically, the engineers will combine the ABS sensor with the ABS module to keep your car stable during braking. ABS sensor or what we often call a wheel speed sensor because of its function to measure wheel speed. ABS sensors will monitor wheel rotation and speed. So if your ABS sensor fails to operate, it can’t provide data to the chassis so an error can occur in your chassis control system. Try repairing the ABS sensor or replacing it to fix this problem.

Read more: 6 Causes Of The ABS Indicator Light On And What You Should Do

4. Ground wire problem

Chassis controls are functionally inoperable when the ground wire has multiple faults or shows an error signal. The ground wire in your car is the connection from the minus battery terminal to your car’s chassis. These wires are often overlooked but they do a very important job – the foundation of the entire electrical system in your car. All current flowing in your vehicle passes through this battery ground wire. If you have a bad ground lead in your car, you will have all kinds of electrical problems and the chassis controls will show an error. This is not just a minor issue as it will affect your vehicle’s ability to operate. In this situation, find the damaged one and replace the damaged ground lead with a new one.

5. Damaged wiring harness

A wiring harness is a group of wires that transmit information and power. It is not just a tube that has layers of several insulating materials but also includes the wires and cables that connect the various electrical and electronic parts of your car. This allows cables to pass through in an organized manner. If the chassis fails to transmit commands to other components due to faulty wiring, your car will not start. You need to find out the damaged cable and repair the cable.

Conclusion: Reasons for Chassis Control System Error on Nissan Rogue or X-Trail V-Series

The chassis control system is an outstanding feature of some Nissan models. This can increase the driver’s confidence and enhance the driving experience. Sometimes you will see an error warning about this system on Infiniti or other brands too. It may be a bit difficult for you to diagnose the exact cause of this situation. If you are a hobbyist, please try and this will clearly benefit you. But if you don’t have time, taking the car to your trusted repair shop might be wise for you to do.

Leave a Reply

Your email address will not be published. Required fields are marked *